|
7T2SS 12-01-2005, 09:27 AM Is there a way to replace my door hinge spring with a stronger one? I seem to be having trouble with the detent on my 72 Elky door. Would one from a Monte Carlo of the same year be stronger? The springs that I have on now are not that old. Thanks 7t2ss Bobs 81 12-02-2005, 06:01 PM I can't recall a spring getting weak on a door hinge. What I believe has happened is that the roller pin, for the spring cam, has become worn and the pin (which is press fit/peened into place) has come part way out, and is being pushed sideways. Best bet is to just replace the hinge. In a pinch, I have heated the pin and hammered the roller pin back in place. If you go that route, be sure to pack th roller with grease. Do a SEARCH to find more info on replacing the hinge. Hope this helps. Bob 7T2SS 12-04-2005, 10:08 AM thanks Bob I'll check that out... 7t2ss scottb 07-31-2011, 09:51 PM How in the world do I reinstall the door hinge spring? I've put the (driver door top) hinge back in the car and am having a hard time getting the spring back in. HELP!!! Any ideas??? steelybill 07-31-2011, 10:37 PM I've wrestled a few in the hinge, but there is a tool available for that. When the hinge is out, I use the vise to squeeze the spring in place. Hard to describe the method...... goodcruiser 08-01-2011, 11:45 AM http://www.harborfreight.com/automotive-motorcycle/auto-body/gm-vehicle-door-spring-tool-95344.html | ||