|
: Plastic quarter window mouldings on 83 elky 83choochoo 10-13-2003, 01:06 PM Hi im was wondering if any one might have or know where to buy some either new or in good condition.im looking for the plastic quarter window mouldings for my 83 elky because the plastic on mine are gone brittle and are cracking. i checked GM and all the after market places that i know of but i still can't find any listed. thanks Todd 87SS 10-13-2003, 01:10 PM I see them on evil bay all the time, don't know of a specific manufacturer thou.... 2-Elkys 10-13-2003, 01:36 PM Soffseal makes these i have seen this brand on E-BAY. I have bought other seals from this company they seem to be a quality product. 83choochoo 10-13-2003, 01:43 PM Are they the black plastic pieces that goes over the rear side metal window edge that runs up & down in the rear corner of the quarter window they have a curve and are about two feet long and are held on with screws. 2-Elkys 10-13-2003, 01:45 PM Not sure never paid to much attention seeing as thats one thing i did not need. 2-Elkys 10-13-2003, 02:06 PM Check this E-BAY number see if this is what you are seeking. 2436960709 83choochoo 10-13-2003, 02:19 PM Thanks 85 ss elky, but thats not them. i already bought those new from gm. 2-Elkys 10-13-2003, 02:29 PM Figures thats not what you wanted.. always seems to be my luck also. If you have a picture of what you are seeking upload it and i will keep an eye out for them. hairball 10-15-2003, 07:38 PM It sounds like you are talking about the qtr window weatherstrip. Try. The El Cameno Store. Part#02-0370 Lt side 12.95 Part#02-0380 RTside 12.95 ElkyPete 10-16-2003, 05:44 PM http://www.laureneng.com/flash/images/L59.JPG This what you're looking for? Lauren Engineering has it and some (http://www.laureneng.com) hairball 10-17-2003, 07:31 PM Sorry.Igave you the wrong part.My 79 has been apart so long I forgot about those two. Good luck. John Harris 10-18-2003, 09:34 AM Hey Matt - Please let me know exactly what part you are looking for. See the post by Elky Pete which shows all the mouldings as advertised by Lauren Engineering. If it is one of those you need, I have the entire set in light green that can be repainted to install at one time when you are ready (It includes everything but the dash). The price would be cheap, plus whatever the postage/freight charges are. If it is the thin stainless steel part on the outside of the quarter window post, I can get one to you free. I have an extra one in the garage. Why don't you take a photo of the bad part and post it here. Or send me a private message. John 83choochoo 10-18-2003, 02:50 PM Thanks guys but their not in that pic either. 85 ss elky found some on ebay 2437869431 they are what im looking for. Todd | ||