|
rci2990 10-19-2003, 11:12 AM i put buckets in my 76 and i got a console out of a 74.my question is anybody that either has a console in from factory or put one in their 4th gen elky,how far from the front of the floor do you mount the console.any measurements would be greatly appreciated.thanks. rci2990 11-02-2003, 08:19 PM ttt rci2990 11-07-2003, 09:37 AM ttt rci2990 11-12-2003, 10:31 AM come on somebody got to have a console in their 4th gen elky :-( ElkyPete 11-13-2003, 05:36 AM Sorry but I've only seen them in pictures of El Caminos. I looked for one for my 76 and had one snaged I thought once but it fell through. Should be the same as a MontyCarlo if you can find one that has a console in it. rci2990 11-13-2003, 09:36 AM thanks elkypete i'll check into that. Tcxd40 11-17-2003, 06:10 PM Hi, I do have a factory consloe in my "75, but sorry to say the Camino is burried under years of accummulated junk. Would be days before I could get the measurements for you. What you need to know is that to put in a consloe in a Camino that never had one, you need all of the brackets. These are welded to the floor pan and should be removed via a spot weld remover to do it right. The demensions would be the same as a Chevelle( '73-'76) if you know of someone with a factory console. If I'm not mistaken the Cutlass 442 should be the same. I could give you the measuremnets for that, mine is presently being restored and is accessible, and I may have a set of the consloe brakets removed from another Chevelle. RDR | ||