|
bigbadrat 10-23-2006, 05:24 AM i need help finding the correct traction bars for my elky.the thing just jumps when i nail it to the floor or try and do a burn out.if i dont fix it soon,then i will break something.does andbody know of a good set that i can buy?i have seen a few but dont want to get the wrong ones. Mrapii 10-23-2006, 01:08 PM Had the same problem. Installed upper tubular control arms, poly-urethane bushings and boxed the lower control arms----problem gone. bigbadrat 10-23-2006, 08:31 PM so what u r saying that if i box the lowers,it will stop hopping.so it stops the flexing on the arm it's self?.i was thinking about replacing all the arms and see what that did,but i might just try what u said to do. Mrapii 10-23-2006, 08:42 PM I did all three (tubular adjustable upper control arms, boxed lower control arms and poly-urethane bushings) so I don't know which was most effective but I suspect that boxing the lower control arms might be. FO50FO 10-23-2006, 10:26 PM How much HP do you have? Over 300 box the lowers for sure anyway. I am making about 425-450 and all I have is boxed lowers and it NEVER hops! She either fries em or straight hooks up and goes! Good luck! bigbadrat 10-24-2006, 05:02 AM i dont have really any horsepower as of yet.all i have is a stock junkyard 305 motor in it till i get my 350 paid for.i have a 3.73 posi in it and the thing is a hopper.lol.i had 4.11 in my s10 and never had this problem. | ||