I've removed the A/C from my '78 and without the compressor, I'm missing support for my power steering pump. Anyone know where I can get a cheap non-A/C power steering bracket for a 350 block?
:?

Odd. I just removed the AC compressor from my '83 Malibu wagon's 229 V6, which is 3/4ths of a 305 V8 block. The PS didn't share any bracketry with the AC compressor. So perhaps you outta look for brackets from a later V6 or V8. Mine has a single spacer at the very top of the rear bracket with a bolt through the bracket then the spacer then into the head; so make sure you find and don't loose that spacer, if you remove the stuff from another engine.

jut make a spacer, its real easy

a piece of tube, or some washers or whatever you need

creativity

have to do this stuff all the time

jkut wait til you put headers on and need to make the p/s work

same problem

good luck