I posted this in Gen BS maybe someone here can help w/ my '77 w/o a/c. This is the power steering assembly adjustable support. It mounts the pump assembly (I have the pump and bracket that mounts behind the pully)to the exaust manifold. It allows you to tighten the belt. If someoneone could turn me on to a good 4th gen obsolete parts source, any help would be appreaciated!
This part is all I need to be able to put the clip on and drive it. Well I could use a new set of core assembly upper bushings, I have a used ones but would like to find new.
Thanks,
LTR

When I needed all of the brackets for the front of the big block I put in my '74, the local Chevy dealer had all of them. You may have to look in the old books and cross reference a number, but I got all of them from the dealer and it cost about 1/3 of what the after market stuff cost.

GM part #469599 dicontinued in '96. TOM HESSER CHEVROLET, INC.
(570)343-1221
1001 N WASHINGTON AVE SCRANTON, PA 18509-2917

Still has one and only one in stock. They are the only dealer that still has one so jump on it!

CB. I got lucky and found one! So if anyone else is looking......