|
jez 08-14-2007, 01:54 PM Please help me to determine what camshaft have I got! Who was the producer and what are the spec? Between lobes, there are also symbols like: 0288 D-3 C-3 CWC 7 http://www.hot.ee/ylovoitka/elcamino/cam1.jpg aoehero 08-15-2007, 06:22 AM Well what I can tell from the picture is it is a standard cam. That is it has been brought into the house and is sitting on the hall table while it is being pondered and inspected. It is sitting right next to the wifes plant that she treats with the same loving care that the cam recieves. I can also tell it is not a F cam because they are not allowed into the yard let alone the house! but the maker or duration is a lose to me. old_coot 08-15-2007, 10:22 AM Looks like it is the 50-2434 cam from Chevy---standard hydraulic lifter cam with an intake lobe of 282 degrees advertised duration at .465 lift and the exhaust id 292 duration and .488 lift--intake lobes are on a 109 degree center and the exhaust is on 119 degree centers.......Dan jez 08-15-2007, 11:18 PM Thank You very much! | ||