Hello all ,

New member here, I just purchased a new 500cfm carb for my elky and need to know what aftermarket bracket i need for my transmission and throttle cables? i have everything else done but the electric wires which is a no brainer and the proper bracket for the lines.

Welcome to ECC, Michael. Some of the parts chain stores carry a chrome unniversal type bracket. I have used one in the past and although I was not overly impressed with the quality, it got the job done. The repro outfits like OPGI have some as well.

Michael,

Here's the linkage I used for my Edelbrock 600 CFM carb. I haven't had any problems with it and it can fit a variety of applications.

Summit Racing Link (http://store.summitracing.com/partdetail.asp?autofilter=1&part=TRD%2D9620&N=700+400158+115&autoview=sku)

You should be able to find this at almost any local auto parts store if you don't want to wait for shipping from Summit. I'm pretty sure this is the one Canted was talking about.

I'm dropping a 350 into mine this weekend. Had the same questions about my Edelbrock 600. Found a BM TV cable adapter and a Summit thottle adapter at Summit . Much less than the same items at Auto Zone, even after shipping. :-)