I will be parting out three of my 5th gens. All three are pretty complete with the exception of gauges and dashes. Let me know what you need, I will offer pictures etc.

Dude, Do you have a junk yard behind your house? 8)

Dude, Do you have a junk yard behind your house? 8)

no, at my shop!

how the rear 1/4's cuz i need some bad and what kind of seats do you have and what kind of tranny?

Two of them have good rear 1/4's. No trans or engines in any of them.

how much would you want to sell both of the rear 1/4's for?

You want them from both vehicles, and cut from where to where?

are the side view mirrors good? if so email/post pic please.
p.s. only need driver side but will buy both if needed

Got a rust free dent free tailgate by chance?

Any center consoles? I really only need the ashtray but if I need to take the whole console I will.

are the side view mirrors good? if so email/post pic please.
p.s. only need driver side but will buy both if needed

Yes, I have a couple of sets of mirrors, will send you some pics tomorrow.

Got a rust free dent free tailgate by chance?

I have one with very minor dings on the outside.

Any center consoles? I really only need the ashtray but if I need to take the whole console I will.

No consoles, just a couple of standard (non console) ashtray assemblies.

do you have any posi rear ends? and/or a pair of bucket seats?

I'm also looking at getting rid of my idiot light do your elky's have real needle gauges :lol: ?

do you have any posi rear ends? and/or a pair of bucket seats?

I'm also looking at getting rid of my idiot light do your elky's have real needle gauges :lol: ?
Nope, sorry!

Do you have any good plastic quarter window moulding the ones that go up and down in front of the rear rain gutter on a curve. im still looking for two.

Sure do, three sets, all good condition.

Would you happen to have a front end wiring harness. YOuve probably read my post about my blinker in the Electrical Systems forum. I have checked everything that I can think of and so now am trying to find a cheap front end wiring harness for my 79 :?

Haven't seen the post yet, and I will check the harness in the morning and let you know what condition it is.

For those of you awaiting photos of parts: It's been raining nasty for the last few days, as soon as it lets up I will take and send the pics.

Hey, you wouldn't happen to have a spare flywheel cover for my '85 laying around anywhere , would you ? If so, what would you want for it...?
Thanks, Don.

Would have to crawl under one to see, however, it is too muddy out at the moment to check.

Okay, please let me know ! Or.........If anyone else has a flywheel cover for a 5th. Gen., I would very seriously consider taking it off your hands for a fair price. Don.

I need one as well if you have two.

Thanks

Do you have a Billet Grille? If so how much do you want for it?

How about the Doors? Any with the power windows ?

Are you guys talking about the plastic cover that covers the flywheel and torque converter? If so i think i have an extra one laying around the garage.

Chris

Do you have a Billet Grille? If so how much do you want for it?

How about the Doors? Any with the power windows ?

No billet grills, just stock stuff, and yes, I have two doors with power.

Chris,
Could you check and see if you do have an extra one. I would take it off your hands for a fair price.
Thanks, Don.

Yo auth, I need the little Chevy emblem that goes on a 79 grill. Any chance?

need some interior trim pieces...

grey pieces below the bottom edge of the dash, black stuff for everything above that. can ya help me out?

-dirt

Naw, blue and burgandy

I need "C" pillar trim. If you have both sides in good condition let me know.
Jerry Walker, 850-319-7519

I need a headlight bezel for the passenger side of my 81.

How about an ashtray for an '81 Conquista?

Was one of those elkys non a/c? I removed other a/c components a long time ago. I would now like to replace the large a/c box on the firewall.

All a/c, will double check tomorrow

What about the small chevy emblem that is on a 79 grill?

I will check in the morning, but if I remember correctly, it is probably faded.

Chris,
Could you check and see if you do have an extra one. I would take it off your hands for a fair price.
Thanks, Don.

I checked, i don't seem to have it anymore, or at least i can't find it. Sorry.

Chris

Do you happen to have the interior plastic trim in good condition? If so how much

How much of the trim do you need, and what color?

I am looking for the chrome trim for my rear window on my 79, got any?

Yes, I have the window trim in good condition. 100 bucks for all four pieces shipped to you.

what is the quality of the trim around the bed?
Mines ok but i'd like a little better.

I have great bed trim, with the excetion of the bed corners...all I have left are pitted.

Could you PM me some pics and how much $ your wanting?

It will be a day or two before I have a chance to photogragh them.

thats ok

Do you have any exterior chrome trim? Also, grill and headlight bezels? And do any of the A/C's work on those? I got an 84 Conquista. Thanks.

Do you have any exterior chrome trim? Also, grill and headlight bezels? And do any of the A/C's work on those? I got an 84 Conquista. Thanks.

Yes, yes, and yes. What do you need exactly?

I'd like to replace the whole system that is contained within the engine compartment. Except the hoses. As far as chrome goes, anything. Except around the windows.

I have lots of trim, with the exception of some Conquista side trim. I have everything A/C systemwise, but I need to know what it is you need,
do you need evaporator case and core, blower motor, wiring, condensor, compressor and brakets etc?

the gas tank in my 87 leaks,do you have good one and how much to ship it to pa zip-17801.thanks.

Do the gass gauges work? I need a sending unit for an 80.

I need the drivers side headlight trim for my 78. Got one in good shape?

I'm looking for Rocker mouldings, both sides for an 84 Conquista and a dash bezel ring. The plastic ring that attaches to the dash and the cluster goes in.

Thanks

I have lots of trim, with the exception of some Conquista side trim. I have everything A/C systemwise, but I need to know what it is you need,
do you need evaporator case and core, blower motor, wiring, condensor, compressor and brakets etc?I need all those parts of it that are in the passenger side corner near the windshield. That silver thing. I don't have a lot of time right now, so I can't look it up.

DO U HAVE THE BRACKETS FOR THE FRONT BUMPER AND IF U DO HOW MUCH DO U WANT FOR THEM

Hi I was wondering if anyone had a Nice claen tailgate

Well i had asked about the tailgate trim but havn't heard anything yet :(

do u have front bumper brackets to mount the front bumper to the frame?

Sorry I haven't answered all of your requests. Many people want photos of everything but I haven't had a clear day here in a week or to do so.

I have a tailgate, but it is not clean. it has a few bumps and bruises and the inside is scratched up. All in all, it would need a little bondo and a paint job....no rust.

The bed trim is in great shape, it isn't banged or scratched up.

I need the drivers side headlight trim for my 78. Got one in good shape?

Tommy, I think I do, I will check in the morning.

I'm looking for Rocker mouldings, both sides for an 84 Conquista and a dash bezel ring. The plastic ring that attaches to the dash and the cluster goes in.

Thanks

I have the rocker mouldings, both sides in good shape. Do you mean the gauge housing?

do u have front bumper brackets to mount the front bumper to the frame?

Do you mean the impact shocks?

yes the impact shocks n the bracket the bolts to the bumper too

How much do you want for the bed trim

How much do you want for the bed trim

John, I have already earmarked the bed trim for 80elcamino. I have two other cars and will look at the trim on them as well, but I can tell you now, I have no bed corner trim, or tailgate trim available.

thanks I did not notice that they were spoken for . Is the tailgate bowed inside are anything are just scratched up and what would you want for it John

John, it seems that the trim is not that great. But about your bed, You say it's scratched? If so you may want to put a D-I-Y roll-on bed liner. Mine Looks killer and only took 2 days and $65.

http://elcaminocentral.com/albums/album124/new_bed.thumb.jpg

More images here >>> (http://www.elcaminocentral.com/modules.php?set_albumName=album124&op=modload&name=Gallery&file=index&include=view_album.php)

Do you have a front header panel for an 85?

Wanted to know if you have a steering wheel center. The Part that goes over the horn button.
What would you let one go for?
Also if you do have one or two i need to see some pics.

Not sure I know what it is exactly you need...which year and which steering wheel...SS or? Send me a pic of what you mean, I'm sure I have it regardless.

Do you have a license plate pocet Thanks John

pocket sorry

I'll take a look tomorrow, I may have an extra laying around, but I usually sell these with the tailgates and I have sold them all recently.

Do you have any rear windows that are the 4 pane glass, with 2 that slide? I need a rear window set that hopefully have the locks and handles on them.(I assume they have locks anyway :) )

I also need a bench seat, if they are in good shape.

I need fender trim also. And I believe there was chrome trim on the doors about 3/4 they way down. I am not certain, if there was then the previous owner removed it. If you have any I could use that as well.

Thank you in advance.

Do you have any rear windows that are the 4 pane glass, with 2 that slide? I need a rear window set that hopefully have the locks and handles on them.(I assume they have locks anyway :) )

I also need a bench seat, if they are in good shape.

I need fender trim also. And I believe there was chrome trim on the doors about 3/4 they way down. I am not certain, if there was then the previous owner removed it. If you have any I could use that as well.

Thank you in advance.

Nope, sorry.

Do you happen to have the four square body plugs by the tailgate?

How about a front header panel and front bumper for an '81 EL?

Looking for a bumper with the rubber inserts, not the smooth bumper...thanks!

Do you have tailgate trim (top piece) and license plate pocket for an 82?
Needs to be in very good condition.

what about wheels? have any NICE ones?

Also, looking for hood for '85 in good shape, and NICE fr/rr bumpers.

would you have a good engine wiring harness for vin h, 305,a/t, a/c, cruise etc.? let me know, Many Thanks!

Sorry I have not replied in a while to you guys. So far, I have none of the items asked for. Mostly, these cars have been picked pretty clean.

One more little item. Would you have the a/c housing cover, right side, next to the exhaust manifold. This is the one that usually gets a hole knocked in it when the engine is pulled. This is for an 86 elc as is my previous post. Thanks again!

Do you have any emission parts ( or complete system)for an 81 w/305?

I NEED A HOOD

Where are you located?

I PM'd you already but just in case I need a really good looking front bumper w/o the bumper pad, really shiny rear window trim, headlight bezels and some nice rocker panel trim pieces. As close to show quality for an 85. Thanks

Do you have any rust and dent free doors?

Mine have rotted out at the bottoms and i guess getting a new door is the best alternative..

If not do you have any door shell lowers? rust free to about 14 inches up?

How many pennies would you like for these items as well?

ooooooooo...
do u happen to have rear quarter panels?!?!
my are full of holes and just want to replace them :\
thanks
Ray

I pmd you allready but am looking for a front clip or at least front fenders

Sorry guys, but these have been pretty well picked clean!