79Elky
05-16-2009, 09:08 AM
Can't quite figure out how to delete my two earlier posts for the frames and steering box...
Have a whole frame from an 87 MCSS, and the rear frame half from an '80s Elky (I don't know exactly what year nor if it has the tranny crossmember extension required for the 200-4R crossmember). Both are in pretty good shape although both may need to have washers welded in for several of the body mount cushion brackets. The MC frame, of course, is 8" shorter than an Elky but it should be a simple matter to extend it. The half-frame starts about under the middle of the driver's door and all the way back. No bumper shocks on either. All the brake and fuel lines are still on the MC frame as well as the upper rear control arms. $150 for the MC frame, $75 for the half-frame.
Also have the four-bolt-cover steering box from my '84 Elky, no idea how much wear but it felt fine when last driven 2 years ago. $50.
Heater-only box from '84 Elky. Bad core, no blower motor. I don't remember any cracked or stripped holes but there may be one or two. All the interior ducting is also available as well as the heater controls. $75 for all of it.
Maroon dash pad from '84 Elky, fair shape, no big cracks or chunks missing, complete with wiring harness including fuse box and computer wiring from the interior (the exterior computer wiring harness is available but a part has been cut off at the front). I can provide either the original no-gauges cluster or I can provide a gages cluster but you will have to modify the wiring to the cluster connectors for the gages. $100 for non-gages cluster, $125 for gages cluster.
All prices NOT including shipping. I can deliver some things within a reasonable distance for gas cost.
Located in southwestern Connecticut. For transportation, the frames will fit on top of a fullsized Crapice station wagon, that's how I got the MC frame home. PM me here.
Have a whole frame from an 87 MCSS, and the rear frame half from an '80s Elky (I don't know exactly what year nor if it has the tranny crossmember extension required for the 200-4R crossmember). Both are in pretty good shape although both may need to have washers welded in for several of the body mount cushion brackets. The MC frame, of course, is 8" shorter than an Elky but it should be a simple matter to extend it. The half-frame starts about under the middle of the driver's door and all the way back. No bumper shocks on either. All the brake and fuel lines are still on the MC frame as well as the upper rear control arms. $150 for the MC frame, $75 for the half-frame.
Also have the four-bolt-cover steering box from my '84 Elky, no idea how much wear but it felt fine when last driven 2 years ago. $50.
Heater-only box from '84 Elky. Bad core, no blower motor. I don't remember any cracked or stripped holes but there may be one or two. All the interior ducting is also available as well as the heater controls. $75 for all of it.
Maroon dash pad from '84 Elky, fair shape, no big cracks or chunks missing, complete with wiring harness including fuse box and computer wiring from the interior (the exterior computer wiring harness is available but a part has been cut off at the front). I can provide either the original no-gauges cluster or I can provide a gages cluster but you will have to modify the wiring to the cluster connectors for the gages. $100 for non-gages cluster, $125 for gages cluster.
All prices NOT including shipping. I can deliver some things within a reasonable distance for gas cost.
Located in southwestern Connecticut. For transportation, the frames will fit on top of a fullsized Crapice station wagon, that's how I got the MC frame home. PM me here.