|
: fuel sender for F/I application eric305tpi 02-18-2004, 10:13 PM I was wondering if there is a sender/pump assembly that will drop in the tank of my 82(that came with a carbed 305) for TPI fuel injection use that has the feed, return, and canister vent pipe. Currently I'm running an external pump but would like to get rid of the clutter caused by it. Poltergeist 02-18-2004, 11:27 PM I used the V6 fuel injection sender. Has all of the connections for FI, GM part # 25092938. I think from gmpartsdirect.com it's about $180. Not sure from other suppliers. acauth1 02-18-2004, 11:44 PM I used the V6 fuel injection sender. Has all of the connections for FI, GM part # 25092938. I think from gmpartsdirect.com it's about $180. Not sure from other suppliers. I have the V6 sending unit assembly with a vette pump. eric305tpi 02-19-2004, 06:56 PM So I assume that will be a direct drop-in(will fit in the opening and reach to the bottom) for my current tank. Poltergeist 02-19-2004, 09:06 PM It did for mine. acauth1 02-19-2004, 09:20 PM It did for mine. Mine two. eric305tpi 02-19-2004, 10:07 PM Cool sounds like I'm going to have to get one very soon. | ||