Hello!
Bought this http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=280425858395 (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=280425858395)on ebay. There isn't any hardware coming with it, so any tips on how to install it? Where are the bolts located?

Cheers :beer:

I just installed one like it on my 1980. It fits back further than I thought it should, but just fit the side pieces under the fender and it will be obvious where everything else goes. There are three bolts on clips in the front. My clips were still there and all I had to do was bolt it up (1/4 fine thread). the fender needed two 1/8 sheet metal screws. There is a tab on each side of the spoiler that fits into a hole right behind the bumper. It will probably take longer to read this than to bolt it up! Good luck.:smileyb:

Hey hatchdl...was the one you installed exactly like the Uli has? or was the one you had an original GM piece. If I'm not mistaken the one he bought is a reproduction spoiler. What I'm trying to find out is how the overall quality of the reproductions are as well as how well it looks installed.

Feel free to chime in Uli with any comments on the one you have.

I will be needing to find one for my 82 SS

TIA

Mine came with the car (but was not installed), and was purported to be the original that came from the factory. It looks identical to the picture posted by Uli.