My window is shaky and im not sure where to get parts. the scissor part that collapses and expands is very rusty and i dont know where to get a new one. every parts car ive looked at it is rusted also. and my tracks, the plastic is broke off. can anyone help!!!

I just repaired mine yesterday, I kept the rusty window regulator in just cleaned and lubed it up. As far as the plastic roller, they sell it at el camino store.com. The factory piece is riveted on so it will have to be drilled out, the replacement piece is threaded and comes with a lock nut, install it, then grind down the threaded part until you reach the nut, otherwise it will be hitting the pieces inside the door. ( I had to take my window back out after it was installed to grind this down, so make sure you grind it before installing it, learn from my mistake) The window will have to come out but its pretty easy, just 5 nuts. The part is here http://www.elcaminostore.com/product.asp?pf%5Fid=08%2D7008&dept%5Fid=7669 Hope this is what your talking about, just use my advice and everything should go pretty smoothly. I had the same problem and like I said, I just repaired mine yesterday so its all still fresh in my mind. Hope this helps.