I was wondering how to remove the handle that cranks the window up and down? Also any tricks to removing the door glass and crank setup and the lock and handle as well?

Most cranks and door latch handles are attached with a horseshoe shaped spring clip on the back side of the crank. Your local auto parts store sells the removal tool. It looks like a flat piece of spring steel with a 'U' shaped notch on the end. Slide this tool under the handle parallel with the crank at the knob end. Push the clip out of it's slot and the handle will pull straight off. To access your glass and door handles you need to remove your door panel first. Remove armrest, and any attaching screws around the perimeter. You might also have push in clips that can be gently pried out with a flat blade screwdriver. Remove door lock knob and lift panel off door frame. All internal parts are now accessable.

Well got the glass out. But the regulator is now in a few pieces anyone got a diagram of how it connects?

Well got the glass out. But the regulator is now in a few pieces anyone got a diagram of how it connects?

Pull the door panel on the other side.......................:poke: