Hello my friendly helpers. Wipers stop and parks after ignition off and then on... switch, motor or flat tire?

just put some fix a flat in the wiper motor...
then check the wiper connections

Place wiper switch in off position, disconnect electrical connector to gearbox relay, and connect test lamp between terminals 1 and 2 in connector.
If lamp lights, check for grounded wire between motor and switch or defective switch.
If lamp does not light, remove washer pump and inspect gearbox relay latch arm spring. If spring is properly installed, motor is defective.

My typical luck... now the work like they should. If/when they go nonstop again i know what to check, thank you!