http://www.michiganjeepers.com/photopost/data/500/52elkywork3-med.JPG
http://www.michiganjeepers.com/photopost/data/500/52elkywork5-med.JPG
http://www.michiganjeepers.com/photopost/data/500/52eklywork7-med.JPG

I've got one side almost done! I found a massive amount of bondo on the rear 1/4 that I had no idea was there :roll: It took quite a bit of time to smooth it back out after the paint stripper got to it! I'm hoping to have it completly done by the first week of June, I REALLY want to drive it again. It's been two years since I've had it on the road :cry: More update pics coming soon! 8)

what are you planning to do to it besides paint?

Looks like you removed the beb rails? Did you weld them up first or just fill them with bondo? Just curious, since it's on my to do list....

what are you planning to do to it besides paint?

Some of what I'm doing is listed in the tips and tricks forum under "What are your plans". Stuff thats not listed are front frame braces, BMR Fabrication rear control arms, KYB shocks, and the S-10 Xtreme wheels.

Looks like you removed the deb rail? Did you weld them up first or just fill them with bondo? Just curious, since it's on my to do list....

It had some sort of rails on it before I got it, they were already removed when I got it. As for the holes, I welded them up, then ground flat, then a skin of bondo to smooth things out. I have a pair of Elky rails I got from Elky85 to put back on after the paint 8)