ALAsh
10-20-2011, 11:47 AM
Well the bed mat came in this morning and I am happy to report it's a keeper. :nanawrench:
It's not 5/8" thick as suggested but it is 3/8" thick and almost 1/2" thick when measured at the ridges. The ridges are about 1 1/2" wide and 3 3/4" center to center spacing. It must weigh 30-40 pounds.
The material is black molded rubber and is of good quality.
The fitment is not bad. Perhaps within 3/8" of the bed walls and the contour is precise.
Here's the good part.
The mat was $87.50 and that included freight !!!
(However they did charge me Iowa tax of $6.13 even though it came out of North Dakota.)
I purchased it from:
TrukToys
1271 Fayland Drive North
Fargo, ND 58102
Their # 800-218-0609
It is made by:
Rugged Liner Truck Accessories
951 Aiken Road
Owosso, Michigan 48867
On a scale of 1 - 10 I'd rate it an 8 1/2.
If the mat fit real snug to the walls of the Elky I'd easily give it a 10!
Regards,
Arnie in Iowa
It's not 5/8" thick as suggested but it is 3/8" thick and almost 1/2" thick when measured at the ridges. The ridges are about 1 1/2" wide and 3 3/4" center to center spacing. It must weigh 30-40 pounds.
The material is black molded rubber and is of good quality.
The fitment is not bad. Perhaps within 3/8" of the bed walls and the contour is precise.
Here's the good part.
The mat was $87.50 and that included freight !!!
(However they did charge me Iowa tax of $6.13 even though it came out of North Dakota.)
I purchased it from:
TrukToys
1271 Fayland Drive North
Fargo, ND 58102
Their # 800-218-0609
It is made by:
Rugged Liner Truck Accessories
951 Aiken Road
Owosso, Michigan 48867
On a scale of 1 - 10 I'd rate it an 8 1/2.
If the mat fit real snug to the walls of the Elky I'd easily give it a 10!
Regards,
Arnie in Iowa