:mad: Dammmm I took the elky in today and changed the trans fluid, filter, gasket and spark plugs........to make it easyier for the plugs, I took off the tires.....when I put on tire hub caps, one of the plastic clips broke, so now i only have the three on it.....

Any one know if it can be fixed or do I have to buy another.....if anyone has one for sale or where I can get another.......

Oh it is the stock wheels, and it has that small hub cap that covers the wheel nuts........I seen some with the red decal in the center then the gold emblem....mine has like a black decal with a silver wreath.......
It is a 87 Rally Wheel Hubcap

just found this at dixie monte carlo depot...anyone every buy from here??

http://www.dixiemontecarlo.com/items/DM50052.html

anyone ..........

Also thought of gluing it with crazyglue then JB weld???

I tried to get a hold of Dixie Monte Carlo twice last week to ask them a question and order some parts but all I got was an answering machine. Anyone ever do buisness with them?

Found a place in san diego, called Andy's Caps.....actually it is on the web....reproduction caps, $48.00shipped.......anyone buy from this location........my first attempt with the JB weld failed, it broke again.......Hey for 48, think I might get them...let me know, thanks....

http://members.cox.net/andyfrangos/

It is hateful, but there is a way to "jury rig" a fix until you can find a reasonable replacement. Drill a small hole in the appropriate place where the tab broke off. Insert an 8 x 10 x 1.5 inch machine screw. Screw one nut all the way down to the plastic to hold the screw in a verticle position. Then, put a second nut at the correct place on the screw (corresponding position to the tab that holds the cap onto the wheel. Run a second nut down on top of the first and tighten them together so they will not move. If they are at the right place on the screw, they will snap into place on the metal holder on the rim.

A better solution is to buy one from Hubcap Annie for $24.00 plus tax and remove the emblem from the broken one and use epoxy glue to cement it to the new cap.

You can find singles on eBay for 10-15 bucks a piece...

I reglued the tab and will try to put it back..if not will try the screw idea, thanks........or the ebay one cap......

If you go the eBay route, make sure all the tabs are in place. I suspect it will be difficult to find one with a matching decal. All I ever see on eBay are the ones with the red Chevy bowtie emblem.

The darn clip broke again...I think for $48, I will get the repro's from san diego.........please if anyone has ordered from them or any other info on getting some let me know....

If you like to drive with original wheels, be prepared to spend $$ on replacements. Really, some things were never meant to be made of plastic. These caps are one of those things!!

Ive got an original one. Clips are still good. Ten dollars shipped.
http://img109.echo.cx/img109/2317/cap2so.th.jpg (http://img109.echo.cx/my.php?image=cap2so.jpg)

I dont have the chev emblem, it came with the black decal and the silver wreath......I would have to buy three decals....let me see if the guy sends me an email with the pictures of the new four caps......

Ebay item 7969373699
I think this is what you are looking for.

I have an 87, those are for 80 and below, however thanks for the info....