Turn Signal Switch in an '84

mondo05 · Posted: Thu Sep 18, 2008 8:05 am Post subject: Turn Signal Switch in an '84

Does anyone know of an easy to re-route the wire that goes from the turn signal switch through the steering column and into the dash? I'd prefer not to have to take the steering column apart.

I recently had to install a new turn signal switch lever and i can't get the wire back down the steering column.

Thanks!

acauth1 · Posted: Thu Sep 18, 2008 9:14 am Post subject:

Use a piece of stiff wire, ie, mechanics wire, guitar string etc, and run it down the inside of the column through the turn signal lever opening. Attach it to the wiring and pull it through the bottom.
_________________
El Camino Central Founder/AdministratorAuto A/C & Electrical Shop Owner, ASE Master

elcam84 · Posted: Fri Sep 19, 2008 8:17 am Post subject:

Like he said. It isn't that hard to do. Done more than a couple without a problem. Takes less than a half hour usually unless you have to do allot of running back and forth for tools.
_________________
Robert Adams
http://gparts.freeyellow.com
84 Conquista