Wanted: 3rd gen Z28 wheels

[Headintheclouds41]

Does anyone out in interwebland have a nice set of grey Z28 wheels for early 3rd gen Z28 and RSs? Here's what I'm looking for, preferably near West Carolina!

These should work on my stock height 81 without issue, right?

[MikesElco94]

Not so sure about all 4 working, you might need 2 pairs of fronts. I will wait for others to chime in, but I don't think the offset of the rears will work on a camino.

[Headintheclouds41]

I've seen other 5th gen with them. They are the same width front and rear so they are interchangeable. I just want to know if spacers are needed in the front or rear.

[ccc]

spacers are needed for the fronts to avoid rim to upper arm interferance. my son had them on his 78 and they rubbed on the lip of the upper control arm. i think we put 1/4 in spacers and longer lugs

[Headintheclouds41]

Originally Posted by ccc

spacers are needed for the fronts to avoid rim to upper arm interferance. my son had them on his 78 and they rubbed on the lip of the upper control arm. i think we put 1/4 in spacers and longer lugs

Good to know, how long were the replacement lugs and where did you get them and the spacers?

[ccc]

spacers were fron the tire store .i got the lugs from napa. those wheels take a conical lugnut as well you need to use or wheel damage will follow

[Headintheclouds41]

Good stuff to know, Thanks

[ccc]

any time . get the lugnuts before you go after the studs to be sure you get the right threads

[1985 elcamino]

I have those on my 85 and the fronts work fine as long as you use stick on welghts on the inside.no spacers were needed

[lcochino]

The ONLY rim for a fifth gen!!!!I have 2 fronts in good condition I can let go for 150.00 shipped.pm me if interested.

[harris5898]

Pm sent

[archerm3]

i had some on mine no rub problems at all. Lost them when I sold my 79ss.

[Rally169]

The wheel bolts are NAPA p/n 641-1581. Size 12-1.5x54mm.
They come 5th a box.