El Camino Central Forum banner

turn signal switch removal in my 85

3K views 7 replies 5 participants last post by  84elcoconquista 
#1 ·
:dontknow:need help removing turn signal switch from steering column in my 1985 conquista. i have the column apart but having issues with the feeding the t/s switch up through the column.
 
#3 ·
Use a stiff wire to get down the side of the column. Use it to pull a string through. Tie the string to the connector and pull it through. Patience is a virtue
 
#7 ·
Thanks. Dont let the list fool you. I am a sucker for old rusty junk. A couple of those are projects i am in the middle of. I keep getting distracted. Short attention span and all.
 
#5 ·
Matthew, if you take the column bracket off (2 bolts holding column up and 4 bolts holding bracket) and remove the black plastic wire cover, fold the wires where the connector is in line with the wires it usually comes out without too much difficulty.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top