El Camino Central Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
148 Posts
Discussion Starter · #1 ·
Transmission Crossmember with dual cutouts made from HD 2x3 (.125) wall tubing. I ran it with a 350 and 700 trans. Should work fine with 200/400 by simply sliding it forward/backwards on frame rails as needed.

$100 plus shipping.
 

Attachments

·
Premium Member
Joined
·
2,536 Posts
I think the newer ones, maybe 84 -87 but not sure, are shorter than the 78-83 crossmembers. At least the one I have from an 86 is too short to fit my 80. It's about 1/2" shorter than my 80 crossmember.

So I wonder how it can fit a 78 to 87? Anyone know for sure?

BTW, both of them are available if anyone needs one.


Jack
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top