El Camino Central Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
449 Posts
Discussion Starter #1
I need some help. I have the craftec tonneau cover. Im getting around to mounting the hinge bracket on the back of the cab. On the bracket there is a piece of vinyl with the two sided tape on it. Can someone post a pic on how and where I stick that vinyl piece once I mount bracket. Thanks
 

·
Deputy Director, Region 1
Joined
·
2,566 Posts
That vinyl strip goes from the bed panel under the rear window to the hinge and acts as a filler panel between the two.
 

·
Registered
Joined
·
449 Posts
Discussion Starter #3
That vinyl strip goes from the bed panel under the rear window to the hinge and acts as a filler panel between the two.
Does it go by the lower chrome moulding of the rear window?
 

·
Deputy Director, Region 1
Joined
·
2,566 Posts
Yeah you should be able to attach it to the lower molding
 

·
Registered
Joined
·
229 Posts
There is a small black metal cover held in by a small Ph screw over the end of the channel that the strip slides into.
When I rec,d my cover kit it was installed .
 
1 - 5 of 5 Posts
Top