El Camino Central Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
1,708 Posts
If you use the kitty hair you will need to tap around the holes to lower the metal soom so you can sand the kitty hair flat with the rest of the panel. If you don't do this you will end up having high spots. Welding them would be better. Who not check around and see what a body shop would charge to do this. You could then grind the welds smooth. Then add a little filler if needed to make it nice a smooth. Then prime it.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top