El Camino Central Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
745 Posts
Discussion Starter #1
Aight, my wiper switch just broke. I cannot afford to replace the switch right now so I need help wiring it straight to the battery, on the high setting, via a toggle switch. I have the switch all I need to know is which wires to run to the switch. And since the switch broke in the on position I guess I just need to pull the fuse? I need to fix this asap
Btw, its an 84
Sent from my DROID RAZR using AutoGuide.com App
 

·
Premium Member
Joined
·
5,787 Posts
The switch makes ground. The yellow wire at the wiper switch is the power feed. If both wires on either side of the yellow wire are grounded you have low speed. If the one (on the right - I think) is grounded you will have high speed. HTH
re-cap 1 wire grounded = high 2. both wires grounded = low The wiper fuse supplies power to the yellow - don't ground it!
 

·
Deputy Director, Region 1
Joined
·
2,566 Posts
Switch on the turn signal? Wipers and cruise or wipers only? You can get a new Dorman brand at most auto parts for about $10-$15.
 
1 - 3 of 3 Posts
Top