[HKDUP87]

Need to know the best option on flipping a motor mount we put in upside down. The motor is already in except the passenger side mount bolt but nothing else is bolted up except the other mount.. Can we just try to lift the one side up with the other side already bolted to the mount or should we just pull the motor and get it over with ?

Thanks
Robert

 

[464elky]

IMO it will be easier to slide the one bolt out and pick the engine up to where it is easy to get to. Sometimes starting those 3 bolts can be a bugger when your upside down and sideways.

 

[steelybill]

It may be a PITA to swap the mount around, but still easier than pulling the engine back out. Do what 464elky recommended.....