El Camino Central Forum banner
1 - 1 of 1 Posts

Premium Member
2,265 Posts
I think you should be able to pour small amounts of oil directly into the low side hose port and then rotate the compressor to distribute the oil internally.

Some say its also ok to pour a little of this compressor oil into each hose and the receiver drier / accumulator. Basically, we are trying to prevent a dry start up of the compressor and subsequent damage.

I would not want to pour all of the recommended oil into the compressor because oil is not compressible and this could cause "slugging" damage.


Sent from my SM-G965U using Tapatalk
1 - 1 of 1 Posts