El Camino Central Forum banner

1 - 3 of 3 Posts

·
ZERO MPG
Joined
·
15,368 Posts
Discussion Starter #1
i pulled a code 41 fuel mixture solenoid grounded or bad. this plug was replaced and i think the wires were touching if this is the correct item but i still need to know if the orange wire or green going to the plug wire witch color wire connects closest to the carb. barrels. in the picture say the plug wire on the connector on the left of the plug what color do i connect to it.?
This should make my engine complete and i can time it.
Thanks
Robert



 

·
Registered
Joined
·
271 Posts
it should not matter what wire goes where as long as they are connected. If the wires where shorted it may have burned the driver in the ECM...when you connect it do you hear a clicking? if so the driver is still good.
 

·
ZERO MPG
Joined
·
15,368 Posts
Discussion Starter #3
it should not matter what wire goes where as long as they are connected. If the wires where shorted it may have burned the driver in the ECM...when you connect it do you hear a clicking? if so the driver is still good.
We will find out i hope not .
Thanks
 
1 - 3 of 3 Posts
Top