El Camino Central Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
3,717 Posts
I installed a tranny fluid cooler in front of the radiator. I then cut the tranny lines, added hose and the correct fittings. By doing that you eliminate the need for bending any tubing and a fluid cooler is always a good thing. This bypasses the radiator completely. Previously, my engine overheated and transferred the heat to the franny fluid. I had to Texas:texas:
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top