[383tpimachine]

The TPI intake will work better on a 327 than it does on a 350. Should be able to spin it to 5500 vs the 5100-5200 on a 350, (or the 4500 my 383 allowed).

I have TB to base from an 85 that will work on those heads and they are very easy to port for some more rpm/flow

 

[383tpimachine]

This motor will be a stroker. .386 I believe. So I need to find an 86 TPI setup or earlier? That correct???


Sent from my Autoguide iPhone app

The 85 TPI setup has a weird ECM, so I would avoid that if possible ( although you could use the intake if you found that). '87 and later intakes can be used, but you will have to do a little work on the angle of the two center bolt holes on each side.

This guy speaks the truth. Stay away from the 870 ecm and get a 165. Then couple it with an ostrich box to tune and not need to burn chips.