El Camino Central Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
343 Posts
Discussion Starter #1
I have to relocate my wiper switch. Look at the picture, I have a unique setup. I was going to relocate to under the dummy lights (opposite the headlight switch) but the rectangular shape of the switch wont fit there. Are there any round, knob style switches, such as the one pictured tgat will work?
128274
128275
 

·
Premium Member
Joined
·
5,712 Posts
If you don't have delay wipers it shouldn't be too hard to find something that will work. 1 wire is grounded for low speed and both wires are grounded for high. Those switches push in for wash. that is the only power supplied to the switch. Switch has to be grounded. Yellow wire at wiper motor is the fused power.
 
1 - 3 of 3 Posts
Top